|
8
Bat Hefer , Israel
3250 km
1989
excellent (used)
FPR 355/950/530/1430, capacity 1250 t, table 900x1120 mm, stroke 530 mm/20 spm Bfnnhds02i more
|
|
12
Trenčianske Stankovce, Slovakia
dealership location
5422 km
1982
ready for operation (used)
202duf Producer Šmeral Zástavka u Brna Pressing force 100 t Condition excellent, fully functional, attached, new shaft Strokes per minute: 63,83,125 Usable number of strokes: 50,50,38 more
|
|
5
Wiener Neudorf, Austria
dealership location
5491 km
2016
ready for operation (used)
Press force 50 toTisch 750x440 mmDelivery time approx. 6 weeks from order placementPress force: 50 toTisch: 750 x 440 mmmot. Tappet adjustment: 70 mmTappet surface: 450 x 300 mmStroke stroke: 12 - 110 mmTappet hole in table: Ø 140 mmTool height min./max.: 220/339 mmOver tool weight: 60 kgMotor: 5,5 kWRequired air pressure: 5,5 - 6 barTappet hole in ram: 45 mmLength: 1.220 mmWidth: 1.580 mmHeight: 2.510 mmWeight: 3.200 kgmwith 6-fold tappet guide resistant table stepless variable stroke number ra... more
|
|
6
2rghb3 Double Column Crank Press (Mechanical) Pressing force: 5000 kN Ram stroke: 500 mm Cushion force in the table: 1600 kN Drawing cushion stroke: 200 mm Min. Installation height: 700 mm Max. Installation height: 1120 mm Ram adjustment: 400 mm Motor power: 90 kW Table: 2800 x 1800 mm Machine weight: 145200 kg more
|
|
3
B3vog0wc Year of production: 1968 Forming force: 100 t Table working area: 900 x 600 mm Maximum ram stroke: 120 mm Main motor power: 7.5 kW Machine dimensions (LxWxH): 1,865 x 1,200 x 2,690 mm Machine weight: 6,500 kg more
|
|
4
pressure 315 t table length 2500 mm table width mm ----- PRESS DESIGN - drive system: eccentric / crank - frame design: H-frame, monoblock - openings in uprights: yes - quick die change system: yes - feedstock transport direction: left to right PRESS FORCES - total force (nominal) 315 to PRESS TABLE - table surface (left-right) 2500 mm - table surface (front-back) 1250 mm - thickness of bols... more
|
|
3
Pressure:25 t throat:250 mm stroke:8 - 80 mm no. of strokes:140 /min distance table/ram, max. stroke up, adjustment up:435 mm table surface area:540 x 400 mm table height over floor:705 - 920 mm Table adjustable:215 mm Hole in the table:160 mm passage to the back:300 mm ram surface:380 x 250 mm ram adjustment:50 mm Bezkbkqdjd power capacity:2,2 kW weight:3,3 t Dimensions (WxDxH):1,2 x 1,5 x 2,7 m German Safety: permitted for manual loading:UVV 11.062 - VBG 7n5.1 NEW electrical controls:Siemens... more
|
|
6
Trenčianske Stankovce, Slovakia
dealership location
5422 km
1988
ready for operation (used)
Kgfecig Made in Czechoslovakia, Smeral Trnava Pressing force 63 t Condition excellent, good condition more
|
|
6
Pressure total: 1200 ton Ram stroke: 700 mm Ram adjustment: 500 mm Shut height (stroke down, adjustment up): 1.450 mm Free frontal opening L-R: 3.850 mm Table surface area : 3.500 x 2.500 mm Ram surface area: 3.500 x 2.500 mm Cushion capacity in table: 330 ton Cushion stroke: 300 mm Number of strokes: 10 [...] B8xj3g2p Required power: 140 kW Weight of machine approx.: 298 ton more
|
|
3
Mtmkj Transfer press SCHULER T2-250-10-400 Pressing force: 250 t Engine power: 60 kW Machine dimensions: 6225 x 3100 8425 mm Table dimensions: 3300x800 mm Max. height of the workpiece: 550 mm Machine weight: 132 t more
|
|
4
Year of production: 1961 Forming force: 40 t Table working area: 630 x 430 mm Be3tjjh8oi Maximum ram stroke: 60 mm Main motor power: 3.7 kW Machine dimensions (W x D x H): 950 x 1,650 x 2,100 mm Machine weight: approx. 2500 kg more
|
|
3
pressure:315 t stroke:20 - 180 mm no. of strokes:20 - 120 /min distance between columns:2340 mm distance table/ram, max. stroke up, adjustment up:930 mm table surface area:2280 x 1250 mm Hole in the table:1500 x 350 mm column travel -side:400 mm ram surface:2000 x 1000 mm ram adjustment:150 mm power requirement:80,0 kW weight:60,0 t dimensions (WxDxH):4,15 x 2,7 x 4,7 m clutch-/ brake combination:pneumatic ram adjustment:motoric stroke adjustment:automatic Bfdysklilt overload protection in r... more
|
|
4
Trenčianske Stankovce, Slovakia
dealership location
5422 km
1969
ready for operation (used)
Manufacturer: Germany A.Schaal KG Elpau339 Disassembled, functional more
|
|
6
Pressure total: 1.200 ton Ram stroke: 600 mm Ram adjustment: 500 mm Shut height (stroke down, adjustment up): 1.250 mm Free frontal opening L-R: 3.600 mm Table surface area : 3.500 x 1.900 mm B8xalbho Ram surface area: 3.500 x 1.900 mm Cushion capacity in table: 240 ton Cushion stroke: 300 mm Cushion area: 3.070 x 1.270 mm Number of strokes: 10 - 16 [...] Required power: 222 kW Weight of machine approx.: 240 ton more
|
|
3
Table: 1575 x 1150 mm Max. ram stroke: 250 mm Stroke: 20 / min Ram adjustment: 100 mm Shut height: 750 mm Bemdgph3wj Ram dimensions: 1380 x 850 mm Engine power: 28 kW Machine dimensions: 2800 x 1240 x 4450 mm Machine weight: 23400 kg more
|
|
7
Technical parameters: - pressing force: 40 t Hgpywzn - number of strokes: 100 / min - stroke: 10 - 80 mm Machine weight: 3040 kg more
|
|
8
pressure t ejector capacity Mp Technical data: Cylinder A (Upper Piston) down: 120 kN; 200 mm; 300 mm/sec Cylinder B (Lower Piston) down: 70 kN; 100 mm; 100 mm/sec Cylinder B (Lower Piston) up: 120 kN; 100 mm; 100 mm/sec Filling shoe: 10 kN; 320 mm; 500 mm/sec Filling height max. 90 mm Hmoourb Repeat Accuracy A + B-Zyl. +/- 0.01 mm Repeat Accuracy Filling Shoe +/- 0.1 mm Vol. Powder Tank 5 liter System Pressure 265 bar more
|
|
3
pressure:160 t distance between columns:1550 mm stroke:300 mm Distance table/ram, stroke up:850 mm Betvcepxj2 Table surface area:1500 x 1300 mm Table height above floor:900 mm Side window:1300 mm Ram surface:1500 x 1300 mm Oil volume:1300 l Power capacity:55,0 kW Weight:31,0 t Dimensions (WxDxH):3,4 x 3,0 x 4,6 m cutting impact absorption:hydraulic ram interlocking:hydraulic more
|
|
4
Trenčianske Stankovce, Slovakia
dealership location
5422 km
1979
ready for operation (used)
Producer: Šmeral Brno Bbozuqgra Disassembled, functional Accessories: hole tool more
|
|
2
Pressure total: 500 ton Stroke: 800 mm Daylight: 1.100 mm Side opening in the columns L ? R: 1.550 mm Distance between the columns F - B: 500 mm Table surface area : 1.500 x 1.000 mm Ram surface area: 1.500 x 1.000 mm Approach speed: 450 mm / sec Working speed: 3 - 28 mm / sec Return speed: 450 mm / sec Dimensions L x W x H: 2.800 x 2.850 x 5.200 mm Required power: 120 kW M79fhd Weight of machine approx.: 30 ton more
|
|
2
nominal pressure 1600 kN distance between columns 500 mm stroke 20 - 160 mm table surface area 1300 x 780 mm ram surface 800 x 550 mm ram adjustment 120 mm throat 400 mm Daudrdyh number of strokes - idle run 50 Hübe/min dayligth 500 mm main drive 17,2 kW control SIEMENS SIMATIC S 7 weight of the machine ca. 14,3 t dimensions of machine L x W x H 2,57 x 2,09 x 3,45 m - with ejector in table - more
|
|
9
In good technical condition. Pressing force 250 t Stroke 460 mm Grip 1000 mm Ram adjustment: 300 mm Passage between columns: 2260 mm T0o8kes7 Passage between bars: 2300 mm Side window 550 x 600 mm Working surface of the ram: 2260 x 1200 mm Table work area: 2260 x 1220 mm Machine width: 3900 mm Machine depth: 3350 mm Machine height: 7000 mm Press weight: 62.000 kg more
|
|
2
pressure 160 t plate thickness mm no of strokes 56 Hub/min ----- PRESS DESIGN - drive system: link drive SLIDE - total force (nominal) 160 to - stroke rate (max.) 56 /min Bfitizgvow V-RING - nominal force 50 to COUNTER RAM - nominal force 25 to DIMENSIONS / WEIGHTS - total height 2990 mm combined table for fixed and moving punch Condition: This machine is not ready for use. It will be sold for ... more
|
|
4
nominal force:200 t stroke:110 - 320 mm no. of strokes:45 - 65 /min distance between columns:600 mm Distance between guideways:490 mm distance table/ram, max. stroke up, adjustment up:550 mm Vsfnyy20 table surface area:500 x 550 mm allowed max. force:320 t blow die to die:400 t ram surface:480 x 480 mm spindle diameter:140 mm power requirement:8,0 kW weight:6,2 t dimensions (WxDxH):1,7 x 1,3 x 3,6 m more
|
Buyers can restrict the circle of potential business partners without extensive checks and favor companies that make honest and righteous shops with high probability.
Of course, disagreements can still arise during the purchasing process. Maschinensucher resp. the Machineseeker Group GmbH is not liable for legal infringements of the buyer resp. seller active on Maschinesucher resp. Machineseeker.
There is no right to the grant of the Machineseeker trust seal. In addition, the seal can be removed.
