Grinding machines buy used

Dealers in this sub-category 776
New Arrivals
7
"B" AXIS 1 DEGREE range -15/+225, 1000MM CENTRE DISTANCE x 175MM HEIGHT, 2 EXTERNAL WHEELS 500/400MM, INTERNAL GRINDING, ACTIVE LENGTH POSITIONING, SWIVEL OF TABLE 8.5 DEGREES, COOLANT TANK, TAILSTOCK WITH FINE TAPER ADJUSTMENT, SENSITRON AIR GAP ELIMINATOR, FANUC 16T. MACHINE AVAILABLE TO END USER CUSTOMER ONLY WITH OPTION OF INSTALLATION, OPERATOR TRAINING, SERVICE ETC GRINDING MACHINES FOR RENT..... Wuhgk WE BUY/SELL ONLY SELECTED STUDER MACHINES DIRECT TO/FROM CUSTOMER AND OFFER INSTA... more
2
internal diameter:150 mm 08kb0hycj grinding depth:300 mm swing diameter:360 mm centre height:180 mm grinding head swivelling:180 Grad grinding head quick motion:200 mm table feed:0,1 - 7 m/min total power requirement:8 kW weight of the machine ca.:3,5 t dimensions of the machine ca.:3 x 1,8 x 1,6 m with face grinding attachment with internal grinding attachment coolant attachment more
5
centre height 100 mm centre distance 400 mm grinding diameter mm grinding spindle speed 1800 - 1970 - 2173 U/min grinding wheel size mm 33 m/sec max. workpiece weight -without tailstock 60 kg internal cylindr. grinding device swivable internal grinding diameter 8 - 60 mm max. grinding depth by internal grinding 14 - 60 mm grinding wheel motor 3 kW 3ijebuxy3 grinding spindel dia. 60 mm grinding spindle speed 22000 U/min. total power requirement kW weight of the machine ca. 1,7 t dimensions... more
4
grinding range 3-50 mm sharp cornered angle min./max. 90-140° weight ca. 120 kg dimensions of the machine ca. 810 x 570 x 1260 mm Condition: ready for operation Electric 380 Volt Protective hood 9h220qtik Fine angle adjustable / grinding - kind tridimensional. Machine dealer with own stock of 2500 m² and certification of the database "Machineseeker". more
2
internal diameter:315 mm grinding depth:500 mm swing diameter:500/600 mm max. bore diameter to be ground:315 mm smallest grindable bore dia.:30 mm grinding depth max.:500 mm stroke of the table:800 mm centre height:315 mm max. distance bet work spindle to grinding stock:1350 mm swivel range of workhead:30 ° hole through spindle:42 mm workpiece spindle stepless:50-450 U/min metric taper of workspindle:60 ° corss traverse of workhead:190 mm max. mass of work-piece ground in centres:320 kg table sp... more
5
-----MACHINE AVAILABLE TO END USER CUSTOMER ONLY----- *****ONLY 14,700 HOURS UNIVERSAL STUDER S36 FAVORIT***** 500mm GRINDING WHEEL, 1000mm BETWEEN CENTRES x 175mm CENTRE HEIGHT, MOVABLE TAILSTOCK (not like many that are FIXED restricting machine setups!!!) WITH TAPER FINE ADJUSTMENT, WHEELHEAD ZERO DEGREES +/- 8.5 DEGREES, SENSITRON, LOW WORKING HOURS, IDEAL PRODUCTION GRINDER FOR GRINDING CARBIDE - TOOL STEEL - STAINLESS - HARDENED STEEL ETC....PRICE... more
5
grinding diameter:280 mm grinding length:1000 mm centre height:140 mm travel -z axis:900 mm Workpiece weight approx.:30 kg grinding wheel diameter:400 mm peripheral speed:140 m/sec total power requirement:70 kW weight of the machine ca.:15 t dimensions of the machine ca.:5 x 5 m Ptlhte centre distance: mm more
6
dia. of draw-in collets 4 - 24 mm 9h2viwxpu max. radius to grind 12 mm grinding range 4 - 24 mm grinding wheel-diameter 100 mm total power requirement 0,4 kW weight of the machine ca. 100 kg dimensions of the machine ca. 1 x 0,6 x 0,4 m Electric 380 Volt Base with drawer Diverse collets Draw-off device Machine has 19 clamping devices 4-14 mm, 12 pieces of grinding wheels 100 mm, puller for grinding wheel. Machine dealer with own stock of 2500 m² and certification of the database "Ma... more
1
grinding length:600 mm grinding width:300 mm workpiece height:375 mm max. table load:300 kg dimensions of grinding wheel:300x76,2x50 mm weight of the machine ca.:3800 kg Lkqex spindle drive:2,8 - 8,4 kW (100% ED) kW Used / overhauled surface grinding machine, Make ELB, type Super Rubin 024 NC-K. Machine no. 189910186 Machine bed made Microgranitan. Machine with table drive system via a toothed belt. Very smooth running. Schnellhubsystem. Table speed controllable. Machine completely dismantle... more
6
centre height 135 mm grinding length 750 mm grinding diameter - min. 8 mm max. grinding diameter 200 mm Bcy8tx0aw0 steady 60 internal grinding diameter 13 - 100 mm max. workpiece weight between centres 75 kg chucking diameter 160 mm table adjustment - longitudinal 160 mm dimensions of grinding wheel 400 x 50 x 203 mm peripheral speed 35 ; 24,5 m/sec turning speeds 1670 U/min swivelling range 180 Grad speeds 15000;20000 U/min total power requirement 4,9 kW hydraulic motor 0,4 kW Length: 2.40... more
6
grinding diameter max. 100 mm regulating wheel width (350x) 250 mm max. width of grinding wheel (650x) 250 mm Control Siemens 840D max. workpiece diameter 100 mm min. workpiece diameter 1,5 mm Mw2st workpiece length - max. 245 mm grinding motor 22 kW drive control wheel 5,7 kW regulating wheel turning speeds 5 - 600 (900) U/min grinding wheel adjustment 0,0001 mm total power requirement 56 kW weight of the machine ca. 13 t dimensions of the machine ca. 5,7 x 3,3 x 2,3 m Centerless grinding ... more
1
x-travel:400 mm y-travel:250 mm workpiece height:500 mm grinding diameter:220 mm table surface area:600 x 320 mm throat:310 mm range of angles:12 ° grinding wheel stroke - vertical:110 mm Dyo8y2u stroke speeds:0 - 6 m/min grinding spindle speed:bis 50000 U/min peripheral speed:max. 35 m/sec capacity:ca. 7 kVA power capacity:6 kW weight of the machine ca.:2 t dimensions of the machine ca.:3 x 3 x 3 m rotary table d = 300 mm frequency changer more
2
dimensions of the machine ca. 0,380 x 0,200 x 0,134 m weight of the machine ca. 0,024 t power requirement kW baseplate-clamping range 110 x 70 mm workpiece sizes max. 56 x 70 x 25 mm profile depth max. 15 mm angular adjustment 0-2 ° Electrik 24 Volt Bbomitldhr Unused unit in a wooden box. Clamping: permanent-magnetic, to use on a table of a grinding machine for grinding pieces with angle. Machine dealer with own stock of 2500 m² and certification of the database "Machineseeker". more
1
grinding length:1000 mm grinding width:300 mm workpiece height:erhöht auf 600 mm max. table load:450 kg dimensions of grinding wheel:400x100x127 mm spindle drive:10-28 kW Overall size:4650x2800x2500 mm grinding spindle speed:1000-2800 U/min total power requirement:38 kW Ypzx30 weight of the machine ca.:6100 kg Used, reconditioned high-precision profile-full cut-grinding machine, manufactured by ELB, type WN 010 with 8-axis CNC controller ELB UNICON. Machine bed made of micro-granite with good... more
5
grinding diameter:300 mm grinding length:630 mm centre height:150 mm control:FANUC O-GC power capacity:5,5 kW grinding wheel diameter:400 mm workpiece weight:120 kg swivel angle for work spindle:+45 / -15 ° long. travel of table:756 mm Gcw73hf total power requirement:7,5 kVA weight of the machine ca.:2,8 t dimensions of the machine ca.:1,8 x 3,0 x 1,85 m more
6

Grinding machine OKAMOTO UPZ-525 NC II

Kaiserslautern, GermanyGermany
6535 km
2011
excellent (used)
OVERVIEW: Brand: OKAMOTO Model: UPZ-525 NC II Application type: Grinding Ss7vhs Machine type: Grinding Machine Availability: Immediately Construction year: 2011 Production hours: 2160 Location: Slovenia Origin country: Japan GENERAL DATA: Measurements width: 2750 mm Measurements depth: 2700 mm Measurements height: 1700 mm Machine weight: 3500 kg MAIN DRIVE: Spindle speed range: 3600 1/min CONTROL UNIT: Brand: Fanuc Model: 21iM-B WORKPIECE: Workpiece z: 397.5 mm Wor... more
6
grinding diameter 3 - 150 mm Control TRIPET TST CNC grinding length 200 mm center height over slide 150 mm work piece spindle speed 75 - 1300 U/min grinding spindle speed 8000 - 150000 U/min Fixed number of revolutions when straightening 75 U/min dimensions 4800 x 3200 x 2150 mm weight ca. 4000 kg required power 10 - 15 kW Max. Movement of the longitudinal slide 480 mm Swivel range of the workpiece headstock +45 / -30 ° Workpiece spindle bore 40 mm X-axis resolution 0,00025 mm U-axis resolution... more
1
grinding wheel diameter 350 mm max. no. of working stations 2 Stück manually feed ja grinding wheel size 350 x 40 x 76 mm 9h2077cmh Drive 2,2 kW turning speed range - grinding wheel 1420 p. min. weight of the machine ca. 200 kg dimensions of the machine ca. 900 x 500 x 1000 mm electric for three-phase 380 Volt Heavy construction! Machine dealer with own stock of 2500 m² and certification of the database "Machineseeker". more
5
grinding diameter:360 mm grinding length:950 mm clamping length:1.000 mm total power requirement:20 kW Cpslxgqq weight of the machine ca.:4.800 kg indexing device and tailstock: complete cooling system: grinding wheel dresser mounted over grinding wheel: 100 % before loading warranty: none In metric standard version for electric connection to 380 V, 50 cycles, 3 periods. more
5
workpiece length:700 mm swing dia.:170 mm clamping length:700 mm Ptkrq3 diameter / bore of grinding wheel:450 mm weight of the machine ca.:15 t dimensions of the machine ca.:7,5 x 5 m grinding diameter:335 mm max. workpiece weight:130 kg Cylindrical Grinder for grinding of high precision workpiece 2 pcs. caliper Marpos Movomatic TID 10 for measuring of diameter C-Axis with hydraulic chuck Heilig 40 bar locking pressure efficient exentric grinding at workpiece drive 52 1/min Grinding wheel 1... more
Try our Machineseeker app now!
Machineseeker app for iPhone and Android.
Want to really stop the chat history?
Yes No
×
Machineseeker chat
Name E-mail Your message to the Dealer
START CHAT WITH DEALER
  You are chatting with: 
  Your contact person: 
  
Your contact is typing
SEND MESSAGE
  You are chatting with: 
  Your contact person: 
  
Your contact seems to be inactive
Chat window close