Other machinery for sale
Your location was not identified (Edit)
|
6
6.5 kWmachine number: 10934The eddy current separator is designed for the separation of non-ferrous metals from the bulk material or the comminuted material. Principle of operation: The bulk material (contaminated with non-ferrous metals) is loaded onto the sliding plate of the vibro feeder and thus moves uniformly to the magnetic drum of the eddy current separator. There, the non-ferrous metals (AL Cu) are thrown into the nonferrous metal droplet by the repulsion force generated by the magnetic... more
|
|
6
Cottbus, Germany
dealership location
5808 km
good (used)
Manufacturer, type, year of construction: not readable
+ Dimensions of the system:
Length: 3150 mm width: 1350 mm height: 1250 mm
+ Throw cross section: 1000 mm x 1100 mm
(can be increased to 1000 x 2500 mm)
+ Mixer:
Working width per section: 700 mm
8d9ztoyib
Drive / wave: geared motor 5.5 kW, 50/60 Hz
Speed: 45 rpm
+ Food processor:
Working width per section: 500 mm
Drive / wave: 7,5 kW, 50/60 Hz
Speed: approx. 1700 RPM
Hole screens can be used
1 sieve available (see photo)
+ D... more
|
|
1
Schönewalde, Germany
5877 km
ready for operation (used)
This cable peeling machine is made from stock, ideal for PVC cables
For inquiries, Ingolf Prossmann is at your disposal
Lgksbnwl more
|
|
7
AEG Bunker with task channel.
Dim. bunker: 4600 x 2500 x 1300 mm.
Task channel: length 3000 mm - width 1000 mm.
Drive by means of magnet vibrators.
Bfof9iiewk
Incl.: Rule apparatus (new). more
|
|
6
PLANT FOR THE RECOVERY OF THE CAR FLUFF I.E. PLASTICS, FOAMS, RUBBER, GLASS, METAL POWDERS, PAINTS AND FABRICS OF THE CAR ABANDONED.
0mw8ubc more
|
|
5
REG-MAC DENSIFIER - REVISED MACHINE WITH REVIEWED EXPERTISE -
- Model T 340
- Year 2001
- 250 kW motor
- 4 kW steam extractor
-Diameter Barrel 1300mm
- Dimensions: 3950x2280xh3500mm
- Hydraulic unit (0.17 kw) for hub bearings lubrication
- Water cooling system
- Exhaust port with pneumatic opening
Bfpndru7bu more
|
|
3
18.5 kWWood machine number: 9785Power: 18.5 KW Year of construction: 1992 Inlet cross-section approx. 400 x 400 mm Drive: 18.5 kW Sieve: 15 mm
Bfsj2iruq0 more
|
|
13
Two stainless steel shftless screw conveyors:
1. Horizontal feeding shaftless stainless steel screw conveyor. Screw diam. 500 mm
2. Vertical shaftless stainless steel screw conveyor. Screw diam. 500 mm, length 10600 mm.
Nptzr
In last two foots is possible to see those in work. more
|
|
2
Hydraulic shears LancierAccessories: blade set NewType: LH-CU 1180bar: 630 barCutting force: 1102 kN Opening width: 180 mmWeight: approx. 16.9 kg
Bfwazkj727 more
|
|
10
Forklift Mitsubishi
Note : Mitsubishi
With double forks sideshifts.
In stock 5 pieces:
NR- Year of construction - Work St. - Max tons - Max lifting height
4379 – 2012 – 18330 – 4500 – 5500
Gv2sik
4381 – 2012 – 18868 – 4500 – 5500
4382 – 2012 – 16335 – 4500 – 5500
4383 – 2012 – 22553 – 4500 – 5500
40 – 2006 – 23705 – 4000 – 5500 more
|
|
|
|
6
Material discharge by 6 spiral screws, drive power 3 x 11 kW, bunker volume: 55 cbm, capacity: approx. 150 cbm/h, dims approx. 12 x 3 x 3,25 m
Fe7i7fb more
|
|
14
EQUIPMENT
Ysbxts
Max. Working width: 7.90 m
Rotor width: 5.25 m
Rotor diameter: 1.60 m
Pitch Height: 2.50 m
Panoramic cabin
Max. rotational speed 200 rpm
Caterpillar system more
|
|
2
55 kWPlasticsWoodOtherMachine number: AQZThe shredding is carried out by chains which rotate horizontally at high speed in a stationary cylinder. The input material is fed from above, crushed and ejected via a lateral flap. The degree of comminution is determined by the time spent in the machine. In addition, the hogger is insensitive to foreign bodies. ONE VIEW:No expensive tool costsMinimal wear costsHigh throughputSafe separation of impurities
Jbwekx7b more
|
|
8
Vicenza, Italy
5711 km
2016
good condition (used)
Mobile Screen W. Ladurner “Terra Select T50”
Year Built: 2016
Engine JCB TCAE EU-Stufe IV. Tier 4f
Performance 55 kW - 75 CV
Tank 300 litres approx.
Hopper
Capacity 4.4 m3 ca
Width 4.040 mm
Depth 1.850 mm
Grain sizes 2
Trommel
Length 4.500 mm
Diameter 2.000 mm
Surface 28 m2
Thickness up to 12 mm
Mesh size up to 80 mm
RPM 0-23 rpm
Transp. Dimens. 11.150 x 2.550 x 4.050 mm
Weight 16.000 kg approx.
Fine G. Belt
Ii0nkmgt
Width/Length 800/4.900 mm
Coarse G. Belt
Width/Length 1.000/4.9... more
|
|
12
Stuhr bei Bremen, Germany
6208 km
2007
good (used)
Presto auger compactor SP with container SPB 30, on request including 2nd container Husmann
Technical specification:
Manufacturer: Presto GmbH & Co. KG, Germany
Auger compactor:
Type: SP
Bfhvupjhti
Year of construction: 2007
Drive power: 11 kW
Screw revolution speed: 14 rpm.
Screw diameter: 800 / 500 mm
Rated torque: 7484 Nm
Feed channel: 1200 x 1380 mm
Machine dimensions: 1335 x 1620 x 1250 mm (LxWxH)
Machine weight: approx. 1.800 kg
Container:
Type: SPB 30
Volume: 30 cbm
Dimen... more
|
|
7
Wash Drum Trummer
Bflr3m9xyf
Brand: Trummer
Length drum: 4000mm
Diameter: 1600mm
Drive: 7.5 kW gearbox more
|
|
8
Type: 104CVX560, suction port-Ø 560 mm, P = 6.580 Pa, E-drive 75 kW, V = 6,11 cbm/s
YOM not exactly known - only estimated
Beeegtgfov more
|
|
7
PREVIERO VIBRATING FEEDER
Vstaem
TOP IN STAINLESS STEEL
FRAME IN STEEL
POWER : 2 x 2.2 kW
WORKING WIDTH : 2 000 MM
WORKING LENGHT : 3 500 MM more
|
|
2
30 kWMachine number: 11130 Inlet cross section: approx. 500 x 600 mm Rotor width: 600 mm Rotor diameter: 500 mm
Nph37 more
|
|
0
Vicenza, Italy
5711 km
2015
good condition (used)
Powder vibrating screening
Model VPM 1500 2/X
Condition: second-hand, excellent condition. As good as new.
Bgot7u2gfd
Technical Data Sheets available upon request in English, German and Italian
Technical Features VPM 1500 1/X
Power (kW) 1,5
Centrifugal force (kg) 2150
Sieving decks 1
Mesh surface (m2) 1,575
Weight (kg) 400
With meshes
1450 rpm engine, 380 V, 50 Hz
• Clamping system by rings
• All parts in contact with the product are made of AISI 304 stainless steel
• Base made ... more
|
|
With the patented REMAV light-weight separator LA1200, they turn highly polluted building rubble or ballast into recyclable material in the blink of an eye!
It separates the lightweight materials such as plastic, polystyrene, lightweight concrete or wood from the building rubble stone or concrete. The light weight separator can be integrated easily into any existing recycling plant.
Bc8mp00nwi
Due to the compact dimensions of the system, the screen trestle is easy to transport and can be loade... more
|
|
6
Sword washer Metso.
Brand: Metso
Muovyo
Type: SW1260
Dim.: 6000 x 2500m
Drive: two electric motors of 22 kW each.
Stock: 2 pieces more
|
|
1
Bagging installation for packing (plastic) granulate, agglomerate or powder in valve sacks. height 2m50, widt 1m18, input/hopper above 1200 x 1150, input/hooper below 645 x 633, height of the input/hopper 800. 2 transport screws with 2 motors of 4KW each
Ysbobk more
|
|
13
EQUIPMENTMouth: 6500×2300 mmBall Sizes: 1100×700 mmWeight Bales: 350-550 kgHydraulic DriveEfficiency 250 m3/HElectric Connection 3x400V/N/PE/50HzConveyor Belt
Oayl7tsz more
|
|
3
Rotthalmünster, Germany
dealership location
5711 km
good (used)
Solider Oeltank Gr. 1000mm x 600mm x 1000mm
= 600 Liter
mit Pumpe: Allweiler 9 l/min 10 kp/cm²
Lldxwfj7m
Motor: 0,55 KW 50 Hz 1390U/min more
|
|
6
Hydraulischer Rettungssatz
LUKAS LKS 35 C Kombispreizer
LUKAS LTR 6 / 570 Teleskop - Rettungszylinder
LUKAS GA 3 T Hydraulikaggregat fuer 2 Endgeraete
LUKAS HM 1 A Handpumpe mit 5 m Schlauchpaket
LUKAS LC 55 Pedalschneider
LUKAS KSS 9 Kettensatz
2 x Schlauchpaket 10 m
Lzmkh
Gesamtgewicht Netto ca. 100 kg more
|
|
5
Cable stripping machine designed to operate with PVC, rubber and even lightweight armoured cable. the cable is cut on two sides and very easy to adjustVelocity of cut very highEasy handling
Bzurqtb more
|
|
7
Rolls unused, year of construction 2015510 pieces with roll length: 380 mm -diameter: 133 mm - axle: 30 mm *brand: Precimeca / Continental:=sold857 pieces with roll length: 750 mm - diameter: 133 mm - axle: 30 mm=sold.341 pieces with roll length: 530 mm - diameter: 133 mm - axle: 30 mm.=sold
Nopfb more
|
|
4
PET milling line:
- table for beams
- drum breaking bale with sieve
- conveyor belt with magnetic gate for metals and iron
Bfmbfozh9o
- mill, 55kW engine, 1000 mm long shaft with alternating knives
- 3 screens with sizes fi 10,20,30
- 2 sets of knives
- complete control cabinet
Production year: 2016
The new line purchased from the manufacturer, worked for 1 month. The machine is in perfect condition. Possibility of testing during work. more
|
|
5
Frankfurt, Germany
6095 km
2009
reconditioned (used)
Bin-Lift-Tipping-Device (mobile version) HUSMANN
max load: 600kg
RAL: 6018
Plug: 32Ampere
Engine: 3,0kW
Pressure: 6000N
Dumping height: 1.500mm
Including lid opener!
Lift bins with trunnions
Checked and runs very well. New "DGUV / TÜV check in November 2019!
If you are interesstes in a new one just aks us please.
Bfuzmcz3xv more
|
|
2
75 kW Machine number: 10888 Rotor diameter: approx. 950 mm Rotor width: approx. 1,400 mm Weight: approx. 3,500 kg Dryer with brush screen cleaning: 0.75 kW as well as water injectionThe mechanical dryer type MTM is a functional unit which is used as a component of a wet processing plant for surface drying of pre-shredded plastics or plastics ground via a wet cutting mill, such asThe material fraction is fed continuously at the upper end of the housing through the inlet hopper, e.g. by means of a... more
|
|
7
Schiffdorf, Germany
6240 km
2006
ready for operation (used)
The machine is in good used condition and can be visited like.
Igf9dmmwc more
|
|
6
Built: 2004
Machine number: 16.50.395.04
Stgcys
Engine hours: approx. 3,800
Condition: very good
Drive chain, drive chain wheels, drive pads new (quick change system)
Rotor tools new
Service new
Technical data:
Rent width up to: 5.00 m
Rent height up to: 2.40 m
• Conversion capacity up to: 3,000 m3/h
Engine: Cummins, 209 kW,
Equipment:
Mobile cabin
• hydraulic tailgate
SBA (protective ventilation system) more
|
|
3
Parti conveyor belt connector:
85 boxes - Nilos su11
Bvp889qq
37 boxes - Nilos 7/vc
92 cartons - Comet P15
21 cartons - Mato U37/1200
56 cartons - Asgor 4 more
|
|
5
Umschlagmaschine LIEBHERR LH 22, Baujahr 2013 mit angebauter
( Schnellwechsellsystem ) Powerhand VRS
Bfnjdcz8rn
Excavator LIEBHERR LH 22, age of construction 2013 with attached ( oil quick ) VRS Powerhand
Maschine generalüberholt/Fully refurbished
Betriebsstunden: inkl. neuer Motor/incl. new motor
Maschine ab Werk GUCINEX Polen/Ex work GUCINEX Poland more
|
|
5
5.5 kW Demonstration machine - as good as newThe tube cutter shredding system is a compact extraction system including cutting module for shredding punched grids (also self-adhesive), plastic strips, edge strips, etc.Advantages:Cost-effective shredding and extraction systemHigh availabilityReduced waste volume thanks to integrated cutting moduleLow energy consumption thanks to energy-efficient centrifugal fansLow maintenance costsConveying the cut material through the centrifugal fanReturn air i... more
|
|
1
|
|
1
Umschlagmaschine FUCHS MHL 331 D, Baujahr 2012
Bdwxzpvk
Excavator FUCHS MHL 331 D, age of construction 2012
Maschine GENERALÜBERHOLT/FULLY REFURBISHED
Betriebsstunden VOR Überholung/Operation hours BEFORE refurbishment: 17‘000 Neue Räder/New wheels
Maschine ab Werk GUCINEX Polen/Ex work GUCINEX Poland more
|
|
6
|
|
0
75 kWPlasticsWoodOtherMachineNumber: 11099Rotor Diameter: 800mmThe Air Vortex Mill, Type PLM is a high-performance machine for comminution and grinding of wet, sticky, heat-sensitive, organic and inorganic products into free-flowing powders. Air vortex mills are also used for grinding and drying in one processing stage. The final fineness is determined by the residence time of the material in the grinding chamber, the rotor speed, the grinding elements used and the type of profiles on the grindi... more
|
|
1
|
|
|
Didn't find what you were looking for? Please contact our partners for this category :
Dealer for Other machinery
Dealer for Other machinery
