|
5
Kaiserslautern, Germany
dealership location
6127 km
1988
ready for operation (used)
General Data Measurements width 2530 mm Measurements depth 2340 mm Measurements height 2500 mm Machine weight 4900 kg Workpiece Workpiece drm 160 mm Media Power consumption 12,5 kVA This TOS OHA 16B Shaping Machine was built in 1988 in Czech Republic. This machine can works with a gear cutting of 20 - 160 mm external, and 160 mm internal. During the past, this machine has been producing gear part. Bfo9nouo2w Application Types Shaping more
|
|
7
Lift length: 375 mm X-axis: 510 mm Z axis: 220 mm Table size LxBxH, approx: 350 x 315 x 315 mm Engine power:: 1.1/1.25 kW Connection: 400 V Dimensions LxBxH, about: 1550 x 1200 x 1320 mm Weight, about: 890 kg Facilities: Cibbancw -Screw stick with 160 mm baking width, opening width: 150 mm Article 0320207 more
|
|
9
GR: 1975 Technical parameters: Planing width: 1250 mm Planing length: 3000 - 12 000 Planing height: 1250 mm Table clamping surface: 1100x3000x12000 mm Maximum table load per 1m planing length: - at table speeds up to 40 m / min: 2000 kp - at table speeds from 40 to 80 m / min: 1000 kp Power of table motor: 45 kW Supports displacements on crossbar mm / stroke: 0.25-20 Side support displacements mm / stroke: 0.125-10 Feed slide travel mm / stroke: 0.12-10 Ground plan of the machin... more
|
|
6
x-travel 8000 mm y-travel 2500 mm workpiece height 2360 mm table width 2240 mm table length 10100 mm weight of the machine ca. 110 t dimensions of the machine ca. 20x8,5x5,2 m Benjjmq88d more
|
|
6
Ebersbach, Germany
5978 km
excellent (used)
Waagerecht-Schnellhobler Hobelmaschine Klopp Stoßmaschine Metallhobelmaschine Rlec9qgw Sehr gut erhaltener gebrauchter Waagerecht-Schnellhobler Klopp Typ: M3B Angaben des Herstellers: Stoesselhub: 550 mm Hobel-breite: 500 mm-max: 640mm Senkrechtbewegung d. Tisches : 370 mm Tischflaeche: 500x315 -oben und seitlich Geschwindigkeiten Anzahl: 6 -Doppel-huebe: 15-158 je Min. Tischvorschuebe: 0,2 -4,0 mm/Hub Tisch drehbar beidseitig 90° -Skala ablesbar Antriebsleistung: 380 volt 50... more
|
|
2
Hydraulic feed for planing Manual swiveling possibility of a gear motor for module bar feed for milling. 4 planing supports and separate milling skids The machine is in very good condition. The 4 supports, the bed tracks, the stands and the crossbeam were built in Oct. 1996 overhauled. The table is already coated with Teflon. the 40 kW futurilla milling head is included, the associated control cabinets also. A newly purchased milling head and motor are enclosed. Planer length = tabl... more
|
|
3
Wiefelstede, Germany
dealership location
6257 km
used
Short Hobler, quick Hobler, Planer, Schepping, slotting machine -T - slot table for multiple tools Tool changer Chisel holder Price complete 8zehpx -only sold Weight 34 kg more
|
|
1
grindinglenght: 3000 mm Idzzi0igo grindingwidth: 850 mm z-movement: 800 mm + copying system Used for tram amp; trainrails more
|
|
4
Shapping / planer horizontal shaping machine make KloppHub 500 mm vice 220 mm wide various steels space requirement : W.1200 x D.1700 x H.1500 mmWeight approx.1300 kg B898oty3 more
|
|
11
- Machine is ready for operation - Machine is under power - Inspection by arrangement is possible at any timeType: HZS 2000 x 6000/4Manufacturer: WMWCondition: used, fully functionalBuilt year: 1986Thru width:2000 mmThru height:1800 mmHobell length:6000 mm Cxogabf more
|
|
2
Eibenstock, Germany
5849 km
1972
unexamined (used)
Strigon GH 560 / S Year of construction: 1972 Push stroke length: 560mm Speed level: 8 pieces Table size: 560x400mm Average cutting feed: 0-1,25mm / h Gfwypc9 Dimensions: approx. 2.5x1.3x1,6m Weight: about 1,600kg more
|
|
3
x-axis: 4000 mm y-axis: 1250 mm z-axis: 1250 mm 2rh9gy distance between columns: 1450 mm Passage height: 1300 mm repeating accuracy: +/- 0,03 mm speed: 28 m/min spindle head swivable left - right: ° control: number of spindle speeds: U/min. feed:: m/min. feed:: m/min. feed:: m/min. tool changer with: tool clamping: interface: table-size: mm air-pressure connection: bar total power requirement: ca. 140 kW weight of the machine ca.: 35 t dimensions of machine: m dimensions electric cabinet Lx... more
|
|
8
Nuernberg, Germany
dealership location
5905 km
1974
used
x-travel 0000 mm y-travel 0000 mm z-travel 0000 mm total power requirement kW weight of the machine ca. 0,30 t dimensions of the machine ca. m This is a curve planer JOPP KH250 with curve generator Vso3ju JOCAMAT for the production of curves for cam-controlled lathes. Largest producible flat curve diameter approx. 300mm Largest manufacturable bell curve diameter about 200mm Diameter of the spindles about 20mm Largest curve angle that can be produced in one turn approx. 300 degrees (82 degr... more
|
|
1
Table size: 2000 x 500 mm 3 possible machining actions 1 = plano milling: - power on table: 12 HP 2 = milling: - milling head is includednbsp; 3 = grinding: - the grinding head is not included but can easily be installed Bdmehtixnz The video is an example video of a Liné GSP, not the actual machine for sale! more
|
|
2
1 bum. Stand long planer, Fabr. Waldrich Coburg, Type 3E1915, Y.O.M. 1955 Clvimzz3 Planing length 4000 mm more
|
|
5
Quick-hobler Offer number: 80901 Make: KLOPP Type: Model 550 Machine No.: 57881 Built: 1981 Technical data: - Stroke length up to max. 550 mm - maximum distance from lower edge pushguide to clamping surface 290 mm - Installation height approx. 450 mm - double strokes of the pestle 30 / 60 h/min - Swivel capability of the tool head right + left 45 ° - Machine vice 220 mm 2rjjp3 - Drive 400 V / 1.8 / 2.2 kW - Space requireme... more
|
|
6
Adnet, Austria
5688 km
1950
ready for operation (used)
In addition, an intermediate transmission (Mercedes Benz) was installed for faster work; Pt0cqa Request for self-collection; more
|
|
15
SNK RB 2N Bridge Type Plano Mill New Heidenhain 560 CNC Control fitted in 2017 X Axis Travel - 2743.20mm Y Axis Travel - 1600.20mm Bffakjfua9 Z Axis Travel - 899.16mm Distance between columns - 1676.40mm Table Size - 1498.60mm width x 2489.20mm length Spindle Motor - 22.37kw Spindle Speeds - 30 - 2000 RPM Spindle Taper - No. 50int Complete with double swivel milling head more
|
|
7
Offer a planing machine with infinitely adjustable hydraulic feed, incl. vice and various planing steels 039fvfi8 more
|
|
3
Quick planing machine Fabr.KLOPP Type:550 My.1979 Nm2kj Stroke 550mm with machine vice. In very good condition. more
|
Buyers can restrict the circle of potential business partners without extensive checks and favor companies that make honest and righteous shops with high probability.
Of course, disagreements can still arise during the purchasing process. Maschinensucher resp. the Machineseeker Group GmbH is not liable for legal infringements of the buyer resp. seller active on Maschinesucher resp. Machineseeker.
There is no right to the grant of the Machineseeker trust seal. In addition, the seal can be removed.
