Thermoforming machinery for sale
Your location was not identified (Edit)
|
6
working pressure: 6 bar
workpiece height max.: ohne Tisch: 350 mm
workpiece height max.: mit Tisch: ca.150 mm
vacuum pump: 300 m³/h
foil width: ca.800 mm
control: Siemens S5
S8ygjcav8
connected load: 119 kVA
total power requirement: 119 kVA
weight of the machine ca.: ca. 9,5 t
space requirements of the machine approx.: L:11,0xB:6,0xH:4,8 m
THERMO FORMING MACHINE for vacuum forming and laminating of interior panelling in vehicle construction with films and textiles.
Additionally to this Machine t... more
|
|
3
Moretti VPK C75 Thermoformer
- year 1993
- electrically consulted in 2003
- mold size 700x500
-working: PET trays
Bfpnfunen2
- Hydraulic pressure vacuum more
|
|
13
1 thermoforming machine ILLIG type RV 53 b compatible with RV 53
Molds and frames
forming area 350 x 500 mm
max. material width 550 mm
depth of draw 100 mm positive, 40mm negative
year 2000
EQUIPMENT:
- control system Siemens S7-300, cabinet with air condition
- motor driven foil unreel unit with pneum. Roll lifting system for roll diam. 1200mm
- top heater length 1125mm with row regulation ceramic elements
- lower heater length 875mm with row regulation ceramic elemen... more
|
|
6
Köln, Germany
dealership location
6238 km
2019
new
|
|
6
Forming area: 900 mm x 1900 mm
motor-driven moving frame is individually adjustable through lateral, verschieb-replaceable metal Rails (in many sizes available)
RAM force: 15kN
Heating system: IR control panel, top and bottom heater, every spot on the screen percentage adjustable, reduces the heating power in repose, radiators are driven.
Dgkoax9
Molding height: up to 400 mm / - 450 mm
Control: Siemens S5 (components can still be obtained)
Each function is adjustable on the screen and can progra... more
|
|
6
Film width: 730mm, max. cutting length: 3000mm, cycle rate: 38/min, max. feed length: 300mm, mould closing force: 150kN, max. compressed air supply: 10bar, heating output: 45.1kW.
Ptthya more
|
|
5
Ohrid, Macedonia
4828 km
2008
good condition (used)
Twin screw co-extrusion line for PS/PP sheet extrusion.
Complete system with mixer, dosser, chiller,
Technical information in the attachment.
Nh9q9 more
|
|
Thermoforming machine with central lubrication pump, upper u. Below heating plates, pneum. Upper stamp, ILLIG stacking.
Molding surface (mm) 680x450
Foil width (mm) 700
Deep drawing height (mm) 125
The machine is still in production but will be transported to our warehouse from next year. All offers are valid until the day of loading.
Control system Siemens S5 and Mitsubishi for servo
Extras:
- Servo chain transport
- Transmission in 2007
- ILLIG VHW 72 pre-heating
- ILLIG RS 75b lead frame ... more
|
|
|
|
15
Memmingen, Germany
5903 km
1990
good (used)
Offer here from operational dissolution of a button manufacturer and/or manufacturer of small accessories in the injection moulding procedure approx. 3000 kg of press cores. At least 3000 pieces.....The cores were pressed in steel, hardness of the press cores approx. 60 Rockwell.
Bdmitar9i more
|
|
7
Krotoszyn, Poland
5617 km
1975
good (used)
ILLIG G DSB 54 V thermoforming machine. 1975
190 mm x 540 heating unit
Expandable to 250x540
Depth of pressing approx. 120mm
Bg80i9bpu
360 x 540 cutting unit
New SIMENS Logo DBA8 control. 12/24 U Set of forms Number of cycles 20 / min. more
|
|
4
5-axis CNC machine HG2500, in operation, processing of thermoformed products up to a height of 600 mm and a length of 2,500 mm. 5-axis CNC machine HG3000, in operation, processing of thermoformed products up to a height of 1,000 mm and a length of 3,000 mm.
Btvzxjf more
|
|
15
Thermoforming machine
NOT USED !!! / no dealer commission -
Operating distance:.....3000 x 2000 x 1000mm
Connection power:.....583kW
Heating capacity/output:.....556kW
Gross load weight:.....135,70 kN
Air consumption:.....3356 Liter
Processing of sheet goods:.....till 30mm
Bflkkne9oz
Total output since 2015:.....13 hours
Total production cycles since 2015:..476
# All cost´s of expert demontage through qualified personal of company GEISS AG are including !!
Extras:
# Programmable axes
# Quick ... more
|
|
14
GEISS Vacuum forming machine DU 1500 x 1000 T8 with sheet loader
Max. forming area 1460 x 960 mm
Max. sheet size 1500 x 1000 mm
Max. tool height 620 mm
El. Power consumption 160,9 kW, 233 Amp.
Weight approx. 9000 kg
Year 2005
• Upper heater with SPEDIUM elements + pyrometer, motorized movement
• Lower heater with SPEDIUM elements with glas protection, motorized movement
• 4 cooling fans with water spray mist
• Pyrometer to control the cooling temperature mounted at u... more
|
|
15
forming area 350 x 500 mm
max. material width 550 mm
depth of draw 100 mm positive, 40mm negative
Ldof2a8v
Pressure by Forming 2,5 bar
With Pneum. Extra Hole punching
New Sefrvo drive on Form station in 2019 more
|
|
7
HANDLING SYSTEM FOR REMOVING THERMOFORMED YOGHURT CUP SM600
Power 4.6s dry cycle
Equipment / Additional information:
U = 230 / 400 V
I = 63 A
Fopsqztp
F = 50 Hz
Incl. 3 x conveyor belts / adjustable
(1. L x W x H = 2620 mm x 900 mm x 930 mm)
(2.L x W x H = 2240 mm x 900 mm x 930 mm)
(3.L x W x H = 4700 mm x 900 mm x 900 mm) more
|
|
1
Pfalzgrafenweiler, Germany
dealership location
6037 km
as good as new (ex-display)
|
|
6
SYSTEC M3/95 (SMP type) Pallet Stacker, age 1995 with
Siemens S5-100U-CPU100 PLC Controls.
Bab9b8vbsy
LENZE 8210 AC-Drive.
Stainless Steel Construction,
Full set of Stainless Steel Pallets for 95 mm Cups,
7 x Cavities per Pallet .
In feed width 750 mm.
Ejector/ Pushers to stack Cups out of the Cavities onto 7 x Stainless Steel Stacking-Chutes.
(Pallets can be altered for smaller or larger dia. Cups) more
|
|
2
Technical information:
Thermoforming machine
Forming Area (Vxh): 700 x 250
Depth Of Draw: 150 mm
Number Of Stations: 1
Products Type:Container
Feeding Systems:Roll fed
Model: Gabler F 743
Year 1989
Material: PS, PET
Renovations:
Heating controlleing unit
Forming Table
Table motor
Forming area: 700 x 250
Film dimension: Film width min 470 ; max 720
Depth of draw positive/negative: 15min, 150mm max mm
Nº &type of heaters: ceramic
Regulatio... more
|
|
Sectional refurbished in 2012
forming area 750 x 540 mm
Bcbgf2d0dh
max. material width 800 mm
depth of draw 150 mm positive/negative
with cutting press KMST 20/4
molds are not available more
|
|
CMB MS36-E Inline Grinder, age Sept. 1991:-
Bab0m8jete
With Sound Proof Housing
Blower
Infeed width 630 mm
Motors: 11 kW more
|
|
1
Ainring, Germany
dealership location
5705 km
1990
good (used)
max. forming area 2200 x 1200 mm
max. sheet size 2250 x 1250 mm
depth of draw max. 600 mm with double heating
el. Power consumption total 86,05 kW, 139,7 Amp.
Max. air consumption 2120 NL/cycle (6 bar)
year 1984
- top heater ceramic elements whole field regulation
- bottom heater ceramic elements whole field regulation
- 6 cooling fans
Kf2n2slqv
- pre blow- and mould release automatic
- parallel clamping frame movement
- pneumatic plug assist
- vacuum pump
- control unit Siemens S5 more
|
|
Gabler F703 Thermoformer for PP/ PS Cups/ Containers with Draw of 120 mm
(Cam can be retrofitted to increase Draw upto 150 mm)
Indramat Servomotor Indexing
Extra Long Double Heating for PP (Heating Capacity doubled during rebuild)
Top Heater 50.4 kW
Bottom Heater 31.5 kW
Auto Transport Rail Spreading for PP
Form Area 700 x 300 mm
Max. Film Width 730 mm
Pneumatic Plug Assist
In Mold Trimming
Counter Stacker Station
M3rgf
Delivery Conveyor for Counted Products
Waste Material Winder
Siemens S5 P... more
|
|
4
1 Universal forming machine ILLIG Typ UA 200/G for sheets
max. forming area 1950 x 950 mm
max. sheet size 2000 x 1000 mm
max. mold height 700 mm with double heating
year 1992, 91,2 kW/146 Amp.
- top heater ceramic elements 3 zone regulation with single on/off
For size reduction
- bottom heater ceramic elements 3 zone regulation
Eakuhcq9s
- All production data and heating adjustments can be stored on a disc
- parallel clamping frame with quick frame locking system for top and bottom... more
|
|
Gabler F743 Thermoformer, with:
Infeeder with Film tensioning Dancer Roller
Indramat Servomotor Sheet Indexing.
Double Heating. Top Heater 50.40 kW, Bottom Heater 42.00 kW
720 mm maximum width of film (410mm minimum)
700 mm x 280 mm forming area (combined forming and punching)
Heating Oven length doubled from Original.
Plug Assist
Positive Depth of draw 150 mm max.
Negative Depth of Draw 15 mm
AC motor with inverter drive on Form Station
HMI panel
Sheet Sag Controls
Auto Rail Spreading for PP
... more
|
|
7
Material : PS / PVC
Cutting diam. : 110,8 x 84,7 mm
Inserts: 125, 200, 250, 350, 500 ml
Bervutionb more
|
|
Refurbished ILLIG RDM 63/ 15D Thermoformer with:
Auto unwind stand
Auto Start System
Lenze Servomotor Indexing
Double heating, Top heater 28.4 kW, Lower heater 23.1 kW
Sheet Sag Control
Bhxw9mn
Auto Rail Spreading for PP
Pneumatic Plug assist
Max. form area 750 x 305 mm Max. film width 770 mm
Max. index 360 mm
Max. depth of draw 150 mm Drive motor 3.3 kW
Encoder on the Main Drive Shaft
SCHLEICHER P-SK 2/ 126F Modern PLC Controller for Control of Form Air, Blow- off etc.
Pneumatic Cylinders... more
|
|
5
1 vacuum former ILLIG type UA 100 ED in good condition
max. forming area 960 x 560 mm
max. sheet size 1000 x 600 mm
max. sheet thickness 12 mm
max. height of product 300 mm positive+negative
max. mold height 490 mm
year 2000, max. power consumption ca. 26,3 kW, 42,9 Amp., Working hours 22.500
- top heater ceramic elements with 3-zone regulation
- bottom heater ceramic 3-zone regulation
- parallel clamping frame
20xevv
- central locking of lower reduction frames by hand
... more
|
|
ILLIG RDM 42 /3 Lid/Shallow parts Thermoformer.
Unwind Stand
Reliance Electro-Craft BRU 200 Servomotor Indexing
Double Heating
8-Zone Heater Temperature Controls
OMRON SYSMAC COM1-CPU PLC controls
SEW MOVITRAC AC inverter Main drive with Encoder
470 mm Max Feed Width
450mm x 160mm Max Forming Area
Bc3tstzblj
30 mm Max Draw
165 mm Max feed length
Counter/ Stacker Unit
Waste material Winder
Central Lubrication Pump more
|
|
2
max. sheet size 2000 x 1250 mm
max. forming area 1950 x 1200 mm
max. depth of draw 620 mm with double heating
air consumption max. circa 2000 NL/cycle
year 1989
- Microprocessor control unit with 10 memory places to store datas
- Upper and lower heater TQS-quartz elements, single regulation
By monitor
Upkqk
- adjustable parallel top clamping frame
- vacuum pump with vacuum tank
- plug assist + cooling fans
- foil sagging control by photo cell
- mould release automatic + pre blow automatic
... more
|
|
5
Roll cutter with 1000 mm working width
Pt2yqe
Max. working width : 1000 mm
Max. working height : 150 mm
Table area, booth sides : 1140x1700 mm
Diam. roller : 200 mm
Total weight : 800 Kg
Diamensions : 2400 X 1200 X 1525 (LxWxH)
Power : 400 Volt 50 Hz
Working heigh : 800 mm
Extras: : Two New spare Roll press more
|
|
used Gabler D600 Thermoformer, age 2000:-
Unwind Stand
Indramat Servomotor Indexing.
Top & Bottom Heaters, total Capacity 73.9 kW
Indramat Servomotor Forming Station, Forming area: 600 x 320 mm
Film width: 640 mm max.
B0e9gtze
Depth of draw neg./pos.: 40/15 mm
Clamping force: 150 kN
Idle cycle rate: 45/ min.
Tool types: Combination channel cut
Stacking and counting device
Counted/ Stacked Products transferred automatically to Delivery Conveyor
Waste Material out feed system
Waste Material Winde... more
|
|
4
1 Universal forming machine ILLIG Typ UA 100 ED + BE-P for sheets
with sheet loader and upper pre heating device
max. forming area 960 x 560 mm
max. sheet size 1000 x 600 mm
max. depth 300 mm positive/negative
Cvciago8
year 1985
- top heater ceramic elements whole field regulation
- bottom heater ceramic elements whole field regulation
- parallel clamping frame
- 4 cooling fans
- pre blow- and blow off automatic
- plug assist
- automatic control of foil sacking by photo cell
- front door for ... more
|
|
12
TECHNICAL CHARACTERISTICS OF EXTRUDERS
Main Extruder mm 120-35 D
Co-extruder mm 50-30 D
Useful sheet width mm 1060
Sheet thickness mm 0,2 - 0,5
Productive capacity kg/h 800
TECHNICAL CHARACTERISTICS TFT 100 FORMING MACHINE
Max. mould dimensions mm 1010 x 800
Sheet width mm 650 - 1050
Max. thickness of the sheet mm 0,2 - 2
Stroke of the lower plate mm 210
Tool closing force kg 35.000
3zfaowruo
Max. empty cycles cycles/1’ 35
CUTTING (Trimming) PRESS P.T. 103
Plan opening mm 1150 x 360
Adjustable... more
|
|
1
1 Vacuum forming machine GEISS type DU 1000 x 800 U6
max. sheet size 1000 x 800 mm
72sde3ntc
max. forming area 950 x 750 mm
max. depth of draw 300 mm with double heating
power consumption max. 44,5 kW, 60 Amp.
year 1995
- Microprocessor control unit with 10 memory places to store datas
- Upper heater TQS-quartz elements, single regulation with economic circuit
- lower heater TQS-quartz elements, single regulation with economic circuit
- heater adjustment via TFT monitor and chip card to stor... more
|
|
Verl, Germany
6177 km
1986
excellent (used)
Max. Formfläche mm 1000x800
Max. Plate size mm 950x750
Max. Material thickness mm 10
Npf09
Max. Depth of draw mm 380 (250)
El. Total power kW 38
upper heater
lower heater
Plug Assist
Clamping frames pieces 33 more
|
|
13
2 x Fully Automatic Sheet forming machine with double sheet feeding unit as well auto take off table with pusher and conveyor.
Pre-heating plate upper and lower are available as well pneumatic plug assist.
The transport high adjustment is motorized and with display.
The vacuum pump is new from Busch as well with new display on PLC
Machine is located in our store in Verl and can be inspected any time.
Xklropy more
|
|
6
With Chiller, 23 kW
Pre-heater Kiefel KVH 83
ILLIG STAL 800 Trim Press
Bumuayhx0
Forming area max. mm 680x500
Material width max. mm 720
Depth of draw neg. mm 120
Depth of draw pos. mm 120
index length max. mm 530
tool closing force kN 180 more
|
|
13
Working area 1000 x 510 mm
Trim opening 800 x 380 mm
Max. Film width 800 mm
Beq7rtwuag
Lifting height 120-240 mm
Punching power 20,000 dN
Strokes 25-130 (1 / min)
Drive power 5.5 kW
Additional product information
Just from Production
Overhauled 2002 Mitsubishi Steuerung
Group Trim press
Type Forming / Cutting separate
Forming area (mm) 1000x510
Film width (mm) 800
Depth 200 more
|
|
forming area max. 680 x 400 mm
forming depth neg. 100 mm
Film width max. 720 mm
Feed length max. 350 mm
Clock rate 35 per min
top heater
Berhm7suji
underheater
2011 overhauled more
|
|
4
Material : PET
Fvdfzxlv
Cavity: 9
Product Dimention: 130x138x80 mm
Product description: Fruit Tray with Lid and holes more
|
|
15
Forming size: 680 x 540 mm
Film max width: 750 mm
Material thickness: 0.20 -2.00 mm
Top + bottom heating plates (New in 2018)
Forming station with:
- Top and Bottom forming table / Indramat servo drive
- 2-station pneumatic clamping
Transport Chain with Servo Drive
Hole punching with AC Drive
Cutting station Typ DSB 72 VKU with moveable bottom table / AC Motor
Ber9cgol3v
Stacking station more
|
|
|
Didn't find what you were looking for? Please contact our partners for this category :
Dealer for Thermoforming machinery
Dealer for Thermoforming machinery
