New Arrivals
1
Elect./Voltage: 460 V, 60 Cy, 3 Ph. Bcbep389zs NMS HD150 DUAL SHAFT SHREDDER -- 150 HP motor -- Feed opening 60" x 40" -- (18) Cutters per shaft -- 1-3/4" Thick cutters -- Falk gearbox -- Good for Tires, wood, etc. -- Loaded on your truck more
7

Star screen Backers 2ta

Denver, United StatesUnited States
2344 km
2014
good (used)
It’s a 2014 with 945 hours Backers Starscreen on track Gxia3vhom 10mm single deck Also comes with another 40mm deck. Dosing drum more
3
• Briquette Diameter 60 mm. • Motor 5,5 Kw. • Output 15/70 Kg/h according to material Dwcqtq • Hopper dia 1000mm. • 7 cycles/min. • 3 x cylinders. • Briquette’s length max 60 mm. • Electronic manometer for pomp pressure. • Power panel with PLC Touch Screen Year - 2005 CE Compliant Condition - Very Good more

Gießen, GermanyGermany
6540 km
good (used)
Bc0corgrpc more
6
Manufacturer Strautmann Typ Bale Tainer Year of construction 2010 Hours of operation 4.100 hours Press power main press 60 tons Feed channel 2,815 x 1,085 mm (l x w) Bale size 1,100 x 1,100 x 700 mm (w x d x h) Driving motor 9,2 kW Connected load 15 kW Tying system 4 fold vertical, fully automated Bale weight up to 400 kg, depends on material SPS controller (manuf., type) Siemens S7 1200 Operating panel (manuf., type) Siemens Simatic Touch Panel Baler dimensions built up with hopper approx. 8,84... more
12

Italian Car Baler Bonfiglioli Ariete

Egyesült KirályságUnited Kingdom
5599 km
ready for operation (used)
This machine is in good working condition. It has a 4.8m long charging box and is complete with operators cabin. Please find pictures attached. Nf9gh more
1
Elect./Voltage: 460 V, 60 Cy, 3 Ph. Bbvq0dbqwn COLUMBUS MCKINNON TIRE SHREDDER SYSTEM -- 200 HP Electric Motor powered by a 350kw Genset -- Comes with infeed conveyor along with discharge comveyor -- Replaced all the knives last year (2017) -- Will process 250-300 tires per hour and produce a 1" shredded chip -- Loaded on your truck more
3
length 1000 mm 2kvdvmql3 width 550 mm depth 550 mm total power requirement kW weight of the machine ca. 0,20 t dimensions of the machine ca. 1,20x0,90x0,90 m skip device more
7

HSM HSM6

Wendlingen am Neckar, GermanyGermany
6678 km
ready for operation (used)
Hqroddbck more
5

8189

Grafenwöhr, GermanyGermany
6796 km
excellent (used)
Gvovo8 more
6
Technical data screw compactor Manufacturer Bollegraaf Typ RotoPack 600 Year of construction 1997 (one machine) / 1998 (one machine) Drive power 7,5 kW Hmzvqsdao Height of drive axle over floor 600 mm Diameter of screw flange 620 mm Dimensions of filling opening without funnel 1,700 x 800 mm (l x w) Min. height of filling opening without funnel above floor 1,176 mm Machine dimensions without hopper 2,100 x 1,200 x 1,176 mm (w x d x h) Weight approx. 3 tons each Comments: These machines are sui... more
7

Good Car Baler Colmar P5260

Egyesült KirályságUnited Kingdom
5599 km
2002
good (used)
Manufactured in 2002 and in good condition. This machine has 5m long charging box, diesel drive and is complete with a crane, grab, operators cabin and radio control. Bcz3hfd7wf more
1
Elect./Voltage: 460 V, 60 Cy, 3 Ph. Ddliqv7 VECOPLAN RG62/200 FF FILM AND FIBER SHREDDER -- 200 HP motor ( was replaced 3 years ago) -- 15" Rotor with (88) cutters ( includes NIP cutters) -- Hydraulic ram -- Opening 62" x 80" -- Variable speed drive -- Loaded on your truck more
1
Demo machine with long bekts, screens on demant Wav0o3suv more
15

Heavy - Granulator ELDAN HG 122

Grafenwöhr, GermanyGermany
6796 km
1997
reconditioned (used)
Wxeyc more
6
Manufacturer Strautmann Typ Bale Tainer Year of construction 2011 Hours of operation 3.057 hours Quantity of pressed bales 138 pieces Press power main press 60 tons Feed channel 2,815 x 1,085 mm (l x w) Bale size 1,100 x 800 mm (w x h) length adjustable Driving motor 9,2 kW Connected load 15 kW Tying system 4 fold vertical, fully automated Bcv7jm0zii Bale weight up to 400 kg, depends on material SPS controller (manuf., type) Siemens S7 300 Operating panel (manuf., type) Siemens Simatic Touch Pa... more
2

Special Edition Car baler Lollini A5000 HS

Egyesült KirályságUnited Kingdom
5599 km
2007
good condition (used)
Manufacturer: Lollini Model: AL5000 HS Mobile Year of Manufacture: 2007 Axial Thrust: 160 t (on each of the two opposing cylinders) Bczjyy0uui Minimum Bale Dimensions: 1000 x 600 x 200 mm (7 inch minimum variable) Idle Cycle Time: 55 seconds (50s with automatic cycle) Working Pressure: 220 bar (maximum axial cylinder 260bar) Piston Pumps: 226cc (2off) Diesel Engine: 6-cylinder (200hp) Iveco water cooled with PLC control and electronic check up Opened Charging ... more
1
Elect./Voltage: 460 V, 60 Cy, 3 Ph. Bctbfu30xf MAREN 3036TF TOP FEED SHREDDER -- 30 HP motor -- Feed opening 30" x 12" -- Low noise levels -- Staggered, replaceable steel blades -- Adaptable to various balers. -- Loaded on your truck more
5
3xtx7kqhe more
5
Cogkypw0o Zerkleinerungs-Maschine Fabrikat: Johli. Typ:Champ - 620. more
6
Manufacturer BOA Typ 1700 HSB KTH Year of construction 2002, overhauled in 2017 Driving motor 5,5 kW Length feeding conveyor 4,000 mm overall D89vefed Length elevating conveyor 14,000 mm Length goose neck 1,530 mm Grade 30 ° Effecting width 1,700 mm Dimensions feed hopper Inside dimensions 1,920 x 1,090 x 3,100 mm (w x d x h) Outside dimensions 2,100 x 1,700 x 3,100 mm (w x d x h) Comments: The conveyor belt and hopper were completely overhauled. The frame construction and side walls as well ... more
8
Tandem axle trailer 80 km/h + 10 t + 6-Zylinde diesel + brush with comb + double drum = 3 groups = 3 discharge conveyors + inner drum 80 x 160 mm + external drum coverings square mesh 10 & 20 mm + minor repairs required + belt, bearings and rollers of the drum discharge conveyor before approx. 1 year new + right drum door is mounted prior to sale Kpcz7le more
1
Elect./Voltage: 460 V, 60 Cy, 3 Ph. Gmndq8h0k MAREN 60 Shredder with Feeding Conveyor;MAREN Model "60" Shredder with following specifications: -- Floor-mounted Pinch-belt Shredder -- Infeed Opening 60" -- Options included; Auto Shut-Off, Safety overweight Plates -- MAX-PAK Incline Feed Conveyor -- 60" Wide x 23'6" Long -- 10 HP Motor -- 2" Cleats on 48" Centers -- Sides 40" sides with 27" over belt -- Discharge height approx. 7 feet -- Includes Flared Feed Hopper, 8' head & Tail [..... more
Try our Machineseeker app now!
Machineseeker app for iPhone and Android.
Want to really stop the chat history?
Yes No
×
Machineseeker chat
Name E-mail Your message to the Dealer
START CHAT WITH DEALER
  You are chatting with: 
  Your contact person: 
  
Your contact is typing
SEND MESSAGE
  You are chatting with: 
  Your contact person: 
  
Your contact seems to be inactive
Chat window close