KRAUSS MAFFEI injection molding machine model, 200-630-210 BZ
An injection molding machine designed for processing plastics by injection molding. Operation of injection molding machines is based on a tray from which the raw material is fed, which is in the form of granules, and from a heated cylinder with a screw in which the raw material is melted. After heating, the material is gradually pressed with a screw into a special mold. After injection into the mold, the raw material solidifies, i.e.... more
Drawer connection router OMEC 750
Machine for making connections between min. drawers, crates
the operator shall specify the elements to be connected next
the automatic machine mills the entire width
milling engine power 1.1 kw
spindle speed 18000 RPM
two operating speeds 25 and 35 n/-1
length min/max: 200/1500 mm
width min/max: 6/18 mm
Gully height min/max: 6/18 mm
front thickness min/max: 7/60 mm
Side wall thickness min/max: 10/30 mm
machine dimensions 1300x700x1200h mm
The roughness of the machined surface of the hole during fine boring with a cutter Ra = 1.6 μm. The machine is made in a layout with a fixed stand, carrying a vertically movable spindle head with a retractable spindle and an integrated rotary table having longitudinal and transverse (relative to the axis of the spindle) movement. Separate feed drives allow simultaneous processing in three coordinates and select the most optimal cutting mode, as well as change the feed rate of the nodes during th... more
Automatic machine for the production of kindling RABAUD XYLOFLAM 200/250 ET
The XYLOFLAM 200/250 machine is intended for the production of firewood, fireplace wood (kindling) in the form of ready-made split wood elements. The finished kindling can be packed in 20 or 40 liter grids. Application in the wood industry.
- Manufacturer / brand: RABAUD SAS, France
- Production year: 2015
- Electric drive,
- Splitting wedge: 5 ton force,
- Cutting length (cm): from 16 t... more
sliding table length 3200mm
electric blade regulation up/down
electric angle blade regulation
magnetic measurement on the left fence
magnetic measurement on the right fence
saw speed 4000/5000/6000 RPM
main motor power 7,5kW
scoring unit motor power 0,75kW
Length of working surface: 1250 mm
Working table width: 320 mm
X-axis travel: 820 mm
Y travel: 275 mm
Z axis travel: 420 mm
Spindle taper ISO 50
Dimensions L x W x H 3410 x 2400 x 1720 mm
Machine weight: 2800 kg
Fully functional and in good technical condition, including thrust bearing and accessories. more
Automatic thermoforming machine for thin-walled foamed polystyrene cups - EPS Machinery b.v. - THERMOWARE type THW 3510 with a form up to 10 forms - cups with a diameter of up to 95mm. Other forms may be used for other products:
- automatic basket loading system with dry polystyrene
- mold filling system - pressure
- PLC control cabinet with digital front panel
- mold fixing with a toggel lever
- electric eye for discharge
- electronic speed controller and vacuum control switch
Schneider lower spindle moulder
30 mm diameter interchangeable spindle
spindle length 140 mm
Quick speed change on a two-speed switch
additional speed variation on the belts
speeds 10.000/8000/6000/5000/4000/3000 rpm
5.5 kw engine
Spindle rotation direction L/P
tilting spindle, +45st and -10st
tabletop size 100 x 78 cm
complete roller feed with gearbox more
Vertical boom adjustment: 1600 mm.
Headstock adjustment: 2620-3470 mm.
Spindle end distance from base: 3150-4000 mm.
Spindle taper: MORSE 6.
Spindle Speed - Range: 9-1400 rpm.
Max. drilling diameter: 80 mm.
Machine input: 16kV.
Rotating arm around column: 360.
Machine dimensions L x W x H 14900 x 8400 x 5455 mm.
Machine weight approx. 23 tons. more
Type: CTX 310 eco
Production year: 2008
Number of tools: 12
Controls: SIEMENS 810D powerline
Passage over support: 260 mm
X axis travel: 160 mm
Z axis travel: 450 mm
Bathtub with chip conveyor DMG -ID more
BURKLE vacuum press type BTF 1528-1400
Vacuum press used for covering with thermoplastic foil furniture fronts and profile elements. The automatic undercoat system significantly increases efficiency and speeds up production preparation. It significantly reduces the production process and reduces the costs associated with the place. The press is used in carpentry workshops producing furniture, doors, profiled and flat fronts, panels. The high-performance vacuum pump guarantees proper vacuum and ... more
chamfer lenght mm
distance between columns mm
WORKING RANGE PRESS BRAKE
- total force (nominal) 60 to
- Working length 4 mm
- distance between columns 2500 mm
DIMENSIONS / WEIGHTS
- space requirements -left/right- 3500 mm
- space requirements -front/back- 1780 mm
- total height 2200 mm
- total weight approx. 3900 kg more
Shaft diameter approx. 11.8 mm
Groove approx. 2,5 mm
Thread length approx. 12 mm
4 pieces internal collets
from diameter 11 mm - 23 mm, 4 mm increasing
from diameter 12 mm - 24 mm, 4 mm increasing
from diameter 13 mm - 25 mm, 4 mm increasing
from diameter 14 mm - 26 mm, 4 mm increasing
8 pieces external collets
from diameter 10 mm - 45 mm, 5 mm increasing
from diameter 10,5 mm - 45,5 mm, 5 mm increasing
from diameter 11 mm - 46 mm, 5 mm increasing (2 pieces in t... more
capacity in kVA: 1670 KvA
number of Generators: Stück
type of fuel:
type of fuel: Diesel; Heizöl; Rapsöl; Leichtöl
revolutions per minute of the motor:: 1500 U/min
Number of working hours: 206 h
weight: 38 000 + 38 000 kg
dimensions L x W x H: 12,0 x 3,0 x 3,0 m
- Generator - Capacity 1670 kVA (1336 kW) with 50 Hz
- Fuel: Diesel, Heating Oil, Rapeseed oil; light oil
- revolution per minute 1500rpm
- exhaust systems
- USV Anlage (Gewicht 38.0to)
1 Color Sheet-Fed Offset Press Rotaprint R 45 K
Serial-No. - - Year -
-We would be very pleased with your visit - more machines on Stock-
-Can be inspect-
-On Stock Emskirchen / NÃ¼rnberg - Can be test-
The Machineseeker trust seal gives buyers the ability to detect whether they have to do it with a trusted seller at a glance .
What do we check?
Check of the trade licence or commercial register extract.
Check the address of the dealer.
Validation of Bank connection .
Verification of the telephone accessibility the main phone number.
Credit report must not contains negative criteria.
Buyer complaints can lead to the withdrawal of the seal.
What does this mean for buyers?
Buyers can restrict the circle of potential business partners without extensive checks and favor companies that make honest and righteous shops with high probability.
Of course, disagreements can still arise during the purchasing process. Maschinensucher resp. the Machineseeker Group GmbH is not liable for legal infringements of the buyer resp. seller active on Maschinesucher resp. Machineseeker.
There is no right to the grant of the Machineseeker trust seal. In addition, the seal can be removed.
Try our app for used machines now!
Machineseeker app for iPhone and Android.
All information, offers and prices on this site are subject to change and non-binding!
By using this website, you acknowledge and agree to our Terms & Conditions and Privacy Statement.
Designated trademarks belong to their respective holders.
Machineseeker Group GmbH does not accept any liability for the content of linked websites.